SeisComP3

Table Of Contents

Previous topic

scimex

Next topic

scm

This Page

scimport

Forward messages across two SeisComP3 systems.

Description

scimport is responsible to forward messages from one system to another. The difference to scimex is that scimport does not handle the messages event based. scimport supports two different modes. The relay mode does a simple mapping from GROUP:SYSTEM_A to GROUP:SYSTEM_B. This mode is default.

In case GROUP is not defined in the second system the message is forwarded to IMPORT_GROUP. The import mode supports custom mapping and filter functionality. It is possible to forward GROUP1:SYSTEM_A to GROUP2:SYSTEM_B. In addition the forwarded objects can be filtered by:

Pick
  • Status
  • Phase
  • AgencyID
Amplitude
  • Amplitude
Origin
  • Location
  • Depth
  • AgencyID
  • Status
Event
  • Type
StationMagnitude
  • Type
Magnitude
  • Type

Examples

Example scimport.cfg

# The address of the importing system
sink = sinkAddress

# This option has to be set if the application runs in import mode.
# The routing table has to be defined in the form of source_group:sink_group
routingtable = PICK:PICK

# List of sink groups to subscribe to. If this option is not set the message
# groups will be determined automatically. If this option is set but not
# needed for a setup it can be ignored with the option --ignore-groups
msggroups = GROUP_ONE, GROUP_TWO

# Available filter options
# * means any value
filter.pick.status   = *
filter.pick.phase    = *
filter.pick.agencyID = *

# Values: eq (==), lt (<=) ,gt (>=), *
filter.stationAmplitude.operator = gt
filter.stationAmplitude.amplitude = *

# Values: lat0:lat1 (range)
filter.origin.latitude = *

# Values: lon0:lon1 (range)
filter.origin.longitude = *
filter.origin.depth     = *
filter.origin.agencyID  = *

# Values: automatic, manual
filter.origin.status = *

# Values: earthquake, explosion, quarry blast, chemical explosion,
# nuclear explosion, landslide, debris avalanche, rockslide,
# mine collapse, volcanic eruption, meteor impact, plane crash,
# building collapse, sonic boom, other
filter.event.type = *

# Values: Whatever your magnitudes are named
filter.stationMagnitude.type = *

# Values: Whatever your magnitudes are named
filter.networkMagnitude.type = *

# Values: latency, delay, timing quality, gaps interval, gaps length,
# spikes interval, spikes amplitude, offset, rms
filter.qc.type = *

Configuration

etc/defaults/global.cfg
etc/defaults/scimport.cfg
etc/global.cfg
etc/scimport.cfg
~/.seiscomp3/global.cfg
~/.seiscomp3/scimport.cfg

scimport inherits global options.

sink

Type: string

Address of scmaster to sent imported messages to.

msggroups

Type: list:string

Defines a list of message groups of the source system (connection.server). If not specified the source system is queried for a list of message groups which are then used to check each subscription extracted from the routing table. This parameter allows to override to source query result.

filter.pick.status

Type: string

Defines the pick status to filter for. Allowed values are "automatic", "manual" and "*".

filter.pick.phase

Type: string

Defines the pick phase hint to filter for. Allowed values are all possible phase codes and "*"

filter.pick.agencyID

Type: string

Defines the pick agencyID to filter for. Allowed values are all possible agency ids and "*"

filter.pick.networkCode

Type: string

Defines the pick network code of the processed waveforms. Allowed values are all possible network codes and "*"

filter.amplitude.operator

Type: string

Defines the amplitude comparison operator. Allowed values are "eq", "lt", "gt" and "*".

filter.amplitude.amplitude

Type: double

Defines the amplitude threshold to filter for. The operator configured with "operator" is used to compare this threshold with the incoming value. If "operator" is "*" then values will pass.

filter.amplitude.agencyID

Type: string

Defines the amplitude agencyID to filter for. Allowed values are all possible agency ids and "*"

filter.origin.latitude

Type: string

filter.origin.longitude

Type: string

filter.origin.depth

Type: string

filter.origin.agencyID

Type: string

filter.origin.status

Type: string

filter.origin.arrivalcount

Type: string

filter.event.type

Type: string

filter.stationMagnitude.type

Type: string

filter.magnitude.type

Type: string

filter.qc.type

Type: string

Note

hosts.$name.* A sink definition used for either import or export. $name is a placeholder for the name to be used.

hosts.$name.address

Type: string

Address of sink, e.g. address = 192.168.1.1.

hosts.$name.criteria

Type: string

Defining filter criteria name for sink, e.g. criteria = world-xxl. The criteria must be defined in the criteria.*.

hosts.$name.filter

Type: boolean

Enables/disables filtering based on defined criteria. If set to false and even a criteria is defined, all events will pass. Default is true.

hosts.$name.conversion

Type: string

Optional target format for export.

hosts.$name.useDefinedRoutingTable

Type: boolean

Enables/disables defined routing tables. Default is false.

hosts.$name.routingTable

Type: list:string

Defining routing tables in the meaning of mapping objects to message groups. E.g. Pick:NULL, StationAmplitude:NULL, Origin:LOCATION, StationMagnitude: MAGNITUDE, NetworkMagnitude:MAGNITUDE, MagnitudeReference:MAGNITUDE, OriginReference:EVENT, Event:EVENT.

Command-line

Generic

-h, --help

show help message.

-V, --version

show version information

--config-file arg

Use alternative configuration file. When this option is used the loading of all stages is disabled. Only the given configuration file is parsed and used. To use another name for the configuration create a symbolic link of the application or copy it, eg scautopick -> scautopick2.

--plugins arg

Load given plugins.

-D, --daemon

Run as daemon. This means the application will fork itself and doesn't need to be started with &.

--auto-shutdown arg

Enable/disable self-shutdown because a master module shutdown. This only works when messaging is enabled and the master module sends a shutdown message (enabled with --start-stop-msg for the master module).

--shutdown-master-module arg

Sets the name of the master-module used for auto-shutdown. This is the application name of the module actually started. If symlinks are used then it is the name of the symlinked application.

--shutdown-master-username arg

Sets the name of the master-username of the messaging used for auto-shutdown. If "shutdown-master-module" is given as well this parameter is ignored.

Verbosity

--verbosity arg

Verbosity level [0..4]. 0:quiet, 1:error, 2:warning, 3:info, 4:debug

-v, --v

Increase verbosity level (may be repeated, eg. -vv)

-q, --quiet

Quiet mode: no logging output

--component arg

Limits the logging to a certain component. This option can be given more than once.

-s, --syslog

Use syslog logging back end. The output usually goes to /var/lib/messages.

-l, --lockfile arg

Path to lock file.

--console arg

Send log output to stdout.

--debug

Debug mode: --verbosity=4 --console=1

--log-file arg

Use alternative log file.

Messaging

-u, --user arg

Overrides configuration parameter connection.username.

-H, --host arg

Overrides configuration parameter connection.server.

-t, --timeout arg

Overrides configuration parameter connection.timeout.

-g, --primary-group arg

Overrides configuration parameter connection.primaryGroup.

-S, --subscribe-group arg

A group to subscribe to. This option can be given more than once.

--encoding arg

Overrides configuration parameter connection.encoding.

--start-stop-msg arg

Sets sending of a start- and a stop message.

Import

-o, --sink

Overrides configuration parameter sink.

-i, --import

Switch to import mode (default is relay). Im import mode the routing table has to be specified whereas in relay the routing table will be calculated automatically.

-f, --filter

Enable message filtering.

--routeunknowngroup

Route unknown groups to the default group IMPORT_GROUP.

--ignore-groups

Ignore user specified groups.